VT2 High Performance 380V Drive from 0.75KW to 2.2KW

Basic function

Control system

High performance of current vector control technology to realize 3 phase  

asynchronous motor control

Drive performance

High efficiency driving for induction motor and synchronous motor

Maximum frequency

Vector control：0~500Hz      V/F control：0~500Hz

Carrier frequency

0.5kHz~16kHz; the carrier frequency will be automatically adjusted according to the load characteristics

Input frequency resolution

Digital setting： 0.01Hz

Analog setting： maximum frequency ×0.025%

Control mode

Open loop vector control(SVC)

V/F control

Startup torque

G type：0.5Hz/150%(SVC)；0Hz/180%(FVC)  P type：0.5Hz/100%

Speed range

1：100(SVC)

1：1000(FVC)

Speed stabilizing precision

±0.5%(SVC)

±0.02%(FVC)

Torque control precision

±5%(FVC)

Over load capability

G type：150% rated current 60 seconds; 180% rated current 3 seconds;

P type：120% rated current 60 seconds; 150% rated current 3 seconds

Torque boost

Auto torque boost function；Manual torque boost 0.1%~30.0%

V/F curve

Linear V/F, multi-point V/F and square V/F curve (power of 1.2, 1.4, 1.6, 1.8, 2)

V/F separation

In 2 ways：separation ,semi separation

Acc. / dec curve

Straight line or S curve acceleration and deceleration mode.

Four kinds of acceleration and deceleration time. Acceleration and deceleration time range between 0.0s to 6500s.

DC brake

DC brake frequency： 0.00Hz to maximum frequency. Brake time： 0.0s to 36.0s, and brake current value： 0.0% to 100.0%.

Jog control

Jog frequency range： 0.00Hz~50.00Hz. Jog acceleration/deceleration time 0.0s~6500.0s.

Simple PLC and Multi-speed running

It can realize at maximum of 16 segments speed running via the built-in PLC or control terminal.

Built-in PID

It is easy to realize process-controlled closed loop control system

Auto voltage regulation (AVR)

It can keep constant output voltage automatically in the case of change of network voltage.

Over-voltage/current stall control

It can limit the running voltage/current automatically and prevent frequent over-voltage/current tripping during the running process

Quick current limit

Minimize the over-current fault, protect normal operation of the AC Drive  

Torque limit & control

"Excavators" characteristics, automatically limit torque during operation, prevent frequent over-current tripping.

Closed loop vector mode can realize the torque control.

Personalized

Instantaneous stop

non-stop

When instantaneous power off, voltage reduction is compensated through load feedback energy, which could make AC Drive keep running in a short period of time.

Rapid current limit

To avoid AC Drive frequently over-current fault.

Timing control

Timing control function：set time range 0Min~6500.0Min

Running command channel

Three types of channels： operation panel reference, control terminal reference and serial communication port reference. These channels can be switched in various modes.

Frequency source

There are totally eleven types of frequency sources, such as digital reference, analog voltage reference , analog current reference, pulse reference , MS speed, PLC, PID and serial port reference.

Input terminal

Standard：

5 Digital input terminals, DI5 can be used as 100kHz high-speed input pulse.

2 Analog input terminals

1 Support 0-10V voltage input or 0~20mA current input.

Output terminal

Standard：

1 Digital output terminals,

1 Relay output terminal;

2 Analog output terminals, support 0~20mA output current or 0~10V output voltage;

Extended function：

1 Digital output terminal;

1 Relay output terminal ;

1 Analog output terminal, support 0~10V output voltage.

Keyboard potentiometer

Equipped with keyboard potentiometer or coding potentiometer

Display

Protection function

It can implement power-on motor short-circuit detection, input / output phase loss protection, over current protection, over voltage protection, under voltage protection, overheating protection and overload protection.

Using place

Indoor, and be free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt.

Environment

Altitude

Below 1000m

Ambient temperature

-10 ℃ to +40 ℃ (Derating use when under ambient temperature of 40 ℃ to 50 ℃)

Humidity

Less than 95%RH, without condensing

Vibration

Less than 5.9m/s2 (0.6g)

Storage temperature

－10℃~＋50℃